|
The end price for the standard equipment includes all material, transport and the installation.
The size of delivery depends on your own wishes and on the separate units and the technical and technological requirements for the separate units. The whole construction of the microbrewery is conceived according to the most up-to-date science of brewing. The microbrewery is userfriendly, does not need much maintenance and as a consequence can be run at reasonable prices.
Beer of perfect quality can be produced with this mini-brewery. You have the choice from a variety of beers. The malt needed for brewing is in general to be delivered in sacks and is grinded down to ground malt in a grist mill.
The mash house consists of a mash and lauter tun and a mash and wort pan connected to each other and to the whirlpool. The to tubs and the whirlpool are of high grade steel with traditional copper domes. An operating platform gives access to all three tubs.
The fermentation and storage tanks of the microbrwery are to be found in the tank room. The tanks are cylindrical in form with a cone at the bottom and are supplied with a cooling jacket. After fermentation and storage the beer is pumped into the dispenser tank from where it can be poured either filtered or unfiltered.
You also have the choice of beeing able to fill the beer into barrels or bottles.
The yeast needed for the fermentation is kept in special tubs which are cooled.
For the energy supply electricity or steam is required. A rapid steam generator produces the steam which is necessary to boil the wort. This process can also be achieved using an electrical heating system.
|
Consultation
